1.25G BIDI 1310nm/1490nm SMF SFP Fiber Transceiver Module 40km
SFP-1310/1490-40U compatible 1.25G SFP BIDI Single fiber 1310nm/1490nm 40KM Transceiver
| Product name: | Optical Transceiver | Type: | SFP |
| Bandwidth: | 1.25Gb/s | Wavelength: | TX:1310nm/ RX: 1490nm |
| Distance: | 40KM | connector: | Single LC |
| Operating temperature: | -20~70 C -40~85 C | Warranty: | 2 years |
This article provides insight into the different types of fiber optic modules, the systems that can use the fiber optic module, and also explains how the CBO-IT fiber optic module can be used with communication equipment from several original equipment manufacturers (OEMs). gives
For what systems can the optical fiber module transmitter be used?
The SFP-1310/1490-40U fiber optic module is used for a large number of networks and is usually protocol independent. Optical transmitters are physical layer devices and their purpose is only to send and receive data in the form of optical pulses. These light pulses are then converted into bits and presented to the communication equipment. The main applications of photoreceptors are:
- Ethernet
- Fibre Channel
- InfiniBand
- SDH/SONET
Ethernet is the most widely used network technology. Almost every data network uses Ethernet as its core technology. Another widely used technology is Fiber Channel, which is primarily used for storage networks. Fiber Channel uses custom optical transceivers to support the Fiber Channel protocol and speeds different from Ethernet standards.
For example, broadband Ethernet fiber optic module 1 gigabit per second, 10 gigabit per second, 40 Gbps and 100 Gbps are available, while 4 Gbps Fiber Channel optical transmitters, 8 gigabit per second, 16 GB per second, 32 gigabits per second, etc. are produced in Erionet.
The InfiniBand fiber optic module is also used in certain networks that use the InfiniBand protocol. QSFP fiber optic modules support InfiniBand. Other less commonly used receivers are SDH/SONET optical transmitters used in active optical networks. These enable faster communication over fiber optic cables in a large-scale network that can be spread over a large physical and geographical area. SDH/SONET also enables multi-protocol transmission.
Is Eriont’s SFP-1310/1490-40U fiber optic module compatible with other brands on the market?
Fiber optic modules are standards-based equipment with form factors, pin configurations, and other electrical and optical parameters exactly the same for each manufacturer. It is not necessary to use the equipment manufacturer’s optical module with the equipment, but any standard optical transmitter can be used.
Fiber optic module SFP-1310/1490-40U Eriont They offer a wide range of choices and are fully standards-based, so it can be used with almost any standard-compliant equipment manufacturer. Leading vendors supported by Everiont optical modules include:
Made in Iran – compatible with various products in the market – 2 years warranty
Arivant brand
