

نقد و بررسی
SFP-1490/1310-20D compatible 1.25G SFP BIDI Single fiber 1490nm/1310nm 20KM Transceiver
Product name: | Optical Transceiver | Type: | SFP |
Bandwidth: | 1.25Gb/s | Wavelength: | TX:1490nm/ RX: 1310nm |
Distance: | 20KM | Connector: | Single LC |
Operating temperature: | -20~70 C -40~85 C | Warranty: | 2 years |
20 km single core optical fiber module
For what systems can the optical fiber module transmitter be used?
The SFP-1490/1310-20D fiber optic module is used for a large number of networks and are usually protocol independent. This model of optical fiber module is for use in infrastructures that have limited fiber optic cables and want to use fibers optimally – this module has the ability to transmit information on one optical fiber. Optical transmitters are physical layer devices and their purpose is only to send and receive data in the form of optical pulses. These light pulses are then converted into bits and presented to the communication equipment. The main applications of photoreceptors are:
- Ethernet
- Fibre Channel
- InfiniBand
- SDH/SONET
Ethernet is the most widely used network technology. Almost every data network uses Ethernet as its core technology. Another widely used technology is Fiber Channel, which is primarily used for storage networks. Fiber Channel uses custom optical transceivers to support the Fiber Channel protocol and speeds different from Ethernet standards.
For example, broadband Ethernet fiber optic module 1 gigabit per second, module 10 gigs 40 Gbps, 40 Gbps and 100 Gbps are available while 4 Gbps, 8 Gbps, 16 Gbps, 32 Gbps, etc. fiber channel optical transceivers are manufactured in Arivant. .
Is Eriont’s SFP-1490/1310-20D fiber optic module compatible with other brands on the market?
Fiber optic modules are standards-based equipment with form factors, pin configurations, and other electrical and optical parameters exactly the same for each manufacturer. It is not necessary to use the equipment manufacturer’s optical module with the equipment, but any standard optical transmitter can be used.
20 km single core optical fiber module Eriont They offer a wide range of choices and are fully standards-based, so it can be used with almost any standard-compliant equipment manufacturer. Leading vendors supported by Everiont optical modules include:
- Questions
- Can this module be used in sdh?
Yes, it is possible to use it in all equipment with optical fiber module.
What models of this module are currently produced?
From a distance of 100 meters to 180 km
Bandwidth 100 Mbps to 40 Gbps
Made in Iran – compatible with other brands – 2 years warranty
پرسش و پاسخ
پرسش و پاسخی وجود ندارد