The AR-SW16P-G2S series is an unmanaged PoE switch powered by Eriont It is designed, it has 16 PoE ports 16*10/100/1000M and 2*1000M SFP port is Port 1-16 as poe with IEEE 802.3af standard and power of each port up to 30 watts and maximum output power POE The whole switch is 380 watts.
As a PoE power supply, it can automatically and intelligently detect standard-compliant power receiving equipment and supply power through the network cable.
This device can supply power to POE terminal equipment such as wireless AP, webcam, VoIP phone, video access control intercom, etc. through the network cable to supply the network environment that requires high-capacity PoE power supply. It is suitable for hotels, campuses, factories and small and medium enterprises.
Full gigabit port
◇ From a combination of RJ45 ports and Gigabit ports SFP It supports for flexible network and meeting the network needs of different scenarios.
◇ Full support of IEEE802.3x standard
Smart PoE power supply
16*10/100/1000Base-T RJ45 ports, which meet the needs of security monitoring, remote conferencing system, wireless coverage and other scenarios.
◇ IEEE 802.3af/in PoE standard, without harming non-PoE devices.
It has a priority system for the PoE port, when more power is needed, it supplies the high priority level port first and prevents the device from overworking.
Stable and reliable hardware
◇ CCC ، CE ، FCC ، RoHS.
Low power consumption, galvanized steel case cover, with fan
Easy user guide panel, display device status through PWR, Link, PoE LED indicators
| Model | AR-SW16P-G2S | |
| Interface Characteristics | ||
| Ports | 16*10/100/1000Base-T PoE ports (Data /Power) 2*1000Base-X uplink SFP ports (Data) | |
| Network ports | 10/100/1000Base-T(X),Auto-sensing,Full/half duplex MDI/MDI-X self-adaption | |
| Transfer network ports relative to cable type | 10BASE-T: Cat3,4,5 UTP(≤100 meter) 100BASE-TX: Cat5 or later UTP(≤100 meter) 1000BASE-T: Cat5e or later UTP(≤100 meter) | |
| SFP port | Gigabit SFP optical fiber interface, default matching optical modules (optional order single-mode / multi-mode, single fiber / dual fiber optical module. LC) | |
| Optical module type | Multi mode: 850nm 0 ~ 550M,single mode: 1310nm 0 ~ 40KM, 1550nm 0 ~ 180KM. | |
| Definitely switching | ||
| Network Protocol | IEEE802.3 10BASE-T, IEEE802.3i 10Base-T IEEE802.3u 100Base-TX/FX, IEEE802.3ab 1000Base-TX IEEE802.3z 1000Base-X, IEEE802.3x | |
| Forwarding Mode | Store and Forward(Full Wire Speed) | |
| Switching Capacity | 52Gbps | |
| Forwarding Rate@64byte | 26.78Mpps | |
| MAC | 8K | |
| Buffer Memory | 4M | |
| Jumbo Frame | 9.2K | |
| led display guide | Power: PWR (green), network: link/Act (yellow), PoE: PoE (green), data : L/A (green) | |
| Reset Switch | no | |
| Power | ||
| PoE Port | Port 1 to 16 IEEE802.3af/at @ POE | |
| Power Supply Pin | Default 1/2 (+), 3/6 (-) | |
| Max Power Per Port | 30W; IEEE802.3af/at | |
| Total PWR / Input Voltage | 250W (AC100-240V) | |
| power consumption | Standby<15W;Full load<240W | |
| input power | AC 100~240V 50-60Hz 4.1A | |
| Physic characteristics | ||
| Operation TEMP / Humidity | -20~+55°C;5%~90% RH Non condensing | |
| Storage TEMP / Humidity | -40~+75°C;5%~95% RH Non condensing | |
| Dimension (L*W*H) | 440*225*44mm | |
| Net /Gross Weight | <3.0kg / <3.8kg | |
| Installation | Desktop, 19 inch 1U cabinet | |
| Certificates | ||
| Lightning protection / protection level | Lightning protection: 4KV 8/20us; Protection level: IP30 | |
| Certification | CCC;CE mark, commercial; CE/LVD EN60950;FCC Part 15 Class B; RoHS | |
| warranty | 3 years | |
