سوئیچ شبکه
انتقال خطوط تلفن
ماژول فیبرنوری
مبدل های فیبرنوری
پچکورد و پیگتیل فیبرنوری
علاقه مندی ها
اشتراک گذاری
نقد و بررسی
This device can supply POE terminal equipment such as wireless AP, webcam, VoIP phone, etc. through a network cable to supply the network environment that needs high-power PoE power supply. In addition to being used as network infrastructure in data centers and companies, it is suitable for campuses, factory dormitories, and medium and large companies.
The AR-SW24P-410G network switch has full L3 network management function, supports IPV4/IPV6 management, full routing, full security protection, ACL/QoS policy and VLAN functions, and is easy to manage and maintain.
It supports multiple STP/RSTP/MSTP (<50ms) network transmission protection protocols and (ITU-T G.8032) ERPS to improve link backup and network reliability.
When a one-way network goes down, communication can be quickly established through the other link to provide uninterrupted critical communications. According to the actual requirements of the network structure, you can configure multiple application services such as PoE power management, port traffic control, VLAN division and SNMP through the web.
Capabilities
Gigabit ports, 10G uplink
All sections support “Gigabit Ethernet port and 10G SFP+ uplink port”, which enables users to build network flexibility to meet the needs of different scenarios.
◇ full support full-duplex based on IEEE802.3x and half-duplex based
Smart PoE power supply
24*10/100/1000Base-T RJ45 ports can support POE power supply to meet the needs.
Security monitoring, remote conferencing system, wireless coverage and other scenarios.
◇ IEEE 802.3af/in PoE standard, without harming non-PoE devices.
The prioritization system for the PoE port provides the port with the highest priority level the first time during power-up.
Set the port with PoE network management, PoE port power allocation, priority setting.
View power status, activation schedule
security
◇ 802.1X authentication
◇ Port isolation,Storm control.
◇ IP-MAC-VLAN-Port connection.
The ability to process large amounts of data
◇ IEEE802.1Q VLAN, flexible VLAN section, voice VLAN and QinQ configuration.
o QoS, priority mode based on 802.1P, Port & DSCP, queue scheduling algorithm including EQU, SP, WRR and SP+WRR.
◇ ALC, data packaging through the configuration of matching rules, processing operations and
Allowing time, and flexible and secure access control
◇ IGMP V1/V2 و IGMP Snooping.
◇ ERPS/STP/RSTP/MSTP.
◇ Static and dynamic aggregation.
Stable and reliable
Low power consumption, no fan, galvanized steel box.
Stable PoE output
◇ CCC ، CE ، FCC ، RoHS.
User-friendly panel, can show device status through PWR, SYS, Link, L/A, PoE LED indicator.
Easy performance management and maintenance
◇ Web management, command line CLI (console, Telnet), SNMP (V1/V2/V3).
HTTPS ، SSLV3 و SSHV1/V2.
◇ RMON, system log, LLDP and port traffic statistics.
CPU monitoring, memory monitoring, ping test and cable detection.
Technical specifications of AR-SW24P-410G network switch
Model AR-sw24p410G
Interface Characteristics
Fixed Port 24*10/100/1000Base-T PoE ports (Data/Power)
4*1/10G uplink SFP+ fiber slot ports (Data)
1*Console RS232 port (115200,N,8,1)
Ethernet Port Port 1-24 can support 10/100/1000BaseT auto-sensing,Full/half duplex
MDI/MDI-X self-adaption
Twisted Pair
Transmission
10BASE-T: Cat3,4,5 UTP(≤100 meter)
100BASE-TX: Cat5 or later UTP(≤100 meter)
1000BASE-T: Cat5e or later UTP(≤100 meter)
Optical Fiber Port 10G SFP+ optical fiber port, default matching optical modules (optional order single-mode / multi-mode, single fiber / dual fiber optical module.
LC)
Optical Cable/
Distance
Multi-mode:850nm 0~300M(10G) ,850nm 0~500M (1.25G); Single-mode:1310nm 0~40KM,1550nm 0~120KM.
Chip Parameter
Network
Management Type
L3
Network Protocol IEEE802.3 10BASE-T, IEEE802.3i 10Base-T
IEEE802.3u 100Base-TX, IEEE802.3ab 1000Base-T
IEEE802.3z 1000Base-X, IEEE802.3ae 10GBase-LR/SR, IEEE802.3x
Forwarding Mode Store and Forward(Full Wire Speed)
Switching Capacity 598Gbps (non-blocking)
Forwarding
Rate@64byte
95.23Mpps
MAC 32K
Buffer Memory 32M
Jumbo Frame 9.6K
LED Indicator Power: PWR (yellow), system:SYS (yellow); network:Link (yellow);
PoE: PoE (green); Fiber port : L/A (green)
Reset Switch Yes, support one key to restore factory settings
PoE & Power Supply
PoE Port Port 1 to 24
PoE Management PoE working status
Delay start of power supply
PoE output priority configuration
Scheduling of PoE operation and time
Total power limit of PoE power supply
PoE output power allocation, off& af &at
Power Supply Pin Default: 1/2 (+), 3/6 (-)
Max Power Per Port 30W, IEEE802.3af/at
Total PWR / Input
Voltage
400W/ (AC100-240V) 600W/ (AC100-240V)
Power Consumption Standby<25W, Full Load<400W Standby<30W, Full Load<600W
Power Supply Built-in power supply,
AC100~240V 50-60Hz 5A
Built-in power supply, AC100~240V
50-60Hz 6.6A
Physical Parameter
Operation TEMP /
Humidity
-20~+55°C;5%~90% RH Non condensing
Storage TEMP /
Humidity
-40~+80°C;5%~95% RH Non condensing
Dimension (L*W*H) 440*290*44.5mm
Net /Gross Weight <4.4kg / <5.0kg <4.6kg / <5.3kg
Installation Desktop type ,19 inch 1U cabinet installation
Certification & Warranty
Lightning protection / protection level Lightning protection: 4KV 8/20us; Protection level: IP30
Certification CCC;CE mark, commercial; CE/LVD EN60950;FCC Part 15 Class B;
RoHS
Warranty 3 years, lifelong maintenance.
Network Management Features
Interface IEEE802.3X (Full-duplex)
Port temperature protection setting
Port green Ethernet Energy-saving setting
Broadcast storm control based on port speed
The speed limit of the message flow in the access port.
The minimum particle size is 64Kbps.
Layer 3 Features L3 network management ,IPV4/IPV6 management
L3 soft routing forwarding,
Static route, Default route @ 128 pcs, APR @ 1024 pcs
VLAN 4K VLAN based on port, IEEE802.1q
VLAN based on the protocol
VLAN based on MAC
Voice VLAN, QinQ configuration
Port configuration of Access, Trunk, Hybrid
Port Aggregation LACP, Static aggregation
Max 14 aggregation groups and 8 ports per group.
Spanning Tree STP (IEEE802.1d), RSTP (IEEE802.1w), MSTP (IEEE802.1s)
Industrial Ring
Network Protocol
G.8032 (ERPS),Recovery time less than 20ms 250 Ring at most, Max 1024 devices per ring.
Multicast MLD Snooping v1/v2,Multicast VLAN
IGMP Snooping v1/v2, Max 1024 multicast groups, Fast log out
Port Mirroring Bidirectional data mirroring based on port
QoS Flow-based Rate Limiting
Flow-based Packet Filtering
8*Output queues of each port
802.1p/DSCP priority mapping
Diff-Serv QoS,Priority Mark/Remark
Queue Scheduling Algorithm (SP, WRR, SP+WRR)
ACL Port-based Issuing ACL,ACL based on port and VLAN
L2 to L4 packet filtering, matching first 80 bytes message. Provide ACL based on MAC, Destination MAC address, IP Source, Destination IP, IP Protocol Type, TCP/UDP Port, TCP/UDP Port Range, and VLAN, etc.
Security IP-MAC-VLAN-Port binding
ARP inspection,Anti-DoS attack
AAA & RADIUS,MAC learning limit
Mac black holes,IP source protection
IEEE802.1X & MAC address authentication
Broadcast storm control,Backup for host datum
SSH 2.0,SSL,Port isolation,ARP message speed limit
User hierarchical management and password protection
DHCP DHCP Client,DHCP Snooping, DHCP Server,DHCP Relay
Management One-key recovery
Cable Diagnose,LLDP
Web Management (HTTPS)
NTP,System work log,Ping Test
CPU instant utilization status view
Console/AUX Modem/Telnet/SSH2.0 CLI
Download & Management on FTP, TFTP, Xmodem, SFTP,SNMP
V1/V2C/V3
arioonet NMS – smart network management system platform(LLDP+SNMP)
System Category 5 Ethernet network cable
Web browser: Mozilla Firefox 2.5 or higher, Google browser chrome V42
or higher, Microsoft Internet Explorer10 or later;
TCP/IP, network adapter, and network operating system (such as Microsoft Windows, Linux, or Mac OS X) installed on each computer in a network
پرسش و پاسخ
0 پرسش و پاسخ
پرسش و پاسخی وجود ندارد
