علاقه مندی ها

Line Terminal pdh AR-P410

ویژگی محصول
    تماس بگیرید

    نقد و بررسی

    AR-P410 optical fiber terminal line is a point-to-point optical transmission device developed based on VLSI. This device has 8 E1 interfaces, 4*10/100/1000 Ethernet interfaces, and Ethernet ports can support switch or VLAN and Q in Q.

    Technical specifications:

    Fiber bandwidth is up to 1.5G, Wire Speed ​​Ethernet bandwidth is 1000M
    The interface rate is 10/100/1000 Mb/s.
    Ethernet interface 4 * switch interface, support VLAN, can be 4 logical separation channels, support QinQ.
    Providing two fiber interfaces 1+1 protection (APS) performance
    The E1 interface conforms to G.703,

    When the optical signal is not received, it can detect that the remote device is turned off or the fiber is disconnected, and it shows the alarm with LED.
     The source device can view the working status of the remote device.

    Provide Loop Back remote interface command, support local E1 Loop Back function, support E1 LOS and AIS alarm, ease of line maintenance
     Transmission distance up to 180-2 km
     No admin support
     AC 220V, DC-48V, DC24V can be optional or both together
     DC-48V/DC24V power supply polarity detection function, no polarity

    Fiber parameters

    Fiber type: multimode or single mode

    Distance: 1-180 kilometers

    : E1 technical specifications
    Port standard   comply with protocol G.703
      Transmission speed2048Kbps±50ppm;
            Acceptable coding   HDB3;
          E1 Impedance:    75Ω (unbalance), 120Ω (balance);
          Jitter tolerance:     In accord with protocol G.742 and G.823
     
     
     
    System parameters:

    Fiber

    Multi-mode Fiber

    50/125um, 62.5/125um,

    Allowed Attenuation: 0~6dBm

    • Gigabit Ethernet Interface (10/100/1000M)

             Interface rate:       10/100/1000M, half/full duplex auto-negotiation

         Interface Standard:     Compatible with IEEE 802.3, IEEE 802.1Q (VLAN)

     MAC Address Capability:4096

     Connector: RJ45, support Auto-MDIX u Working environment

    -10°C ~ 50°C Working temperature:
    5%~95 % (no condensation)Working Humidity:
    -40°C ~ 80°C Storage temperature:
    5%~95 % (no condensation) Storage Humidity:

     

    : Specifications

    Model:Model Number:  ARP410
    Functional description:8E1+4GE PDH，order wire phone，19”inch 1U，le，1+1 Back up Optic fiber SC/FC/LC SFP
    Description of ports:1+1 optical port, 8*E1 interfaces (75/120 ohms), 4*GE interfaces,ce
    Power:Power supply: AC180V ~ 260V；DC –48V；DC +24V

    Power consumption: ≤10W

    Dimensions:Product Size: 19 inch 1U   483X138X45mm(WXDXH)
    Weight:3KG

     

    Application:

    5Km @ 62.5 / 125um single mode fiber, attenuation (3dbm/km) Maximum transmission distance:
    850nm  Wave Length:
    -12dBm (Min) ~-9dBm (Max) Transmitting power:
    -28dBm (Min) Receiver sensitivity:
    16dBm-45dBm Link budge

    Single-mode Fiber

    8/125um, 9/125umt:

    40Km-180km Maximum transmission distance:
    Km @ 9 / 125um single mode fiber, attenuation (0.35dbm/km) Transmission distance:
    1310nm-1550 or wdm Wave Length:
    -9dBm (Min) ~+8dBm (Max) Transmitting power:
    -39dBm (Min) Receiver sensitivity:
      45dBm

     

    		 

    Link budget:

    u E1 Interface

     

    		 
      comply with protocol G.703;  Interface Standard: 
    2048Kbps±50ppm;  Interface Rate: 
      HDB3;  Interface Code: 
        75Ω (unbalance), 120Ω (balance);  E1 Impedance: 
        In accord with protocol G.742 and G.823  Jitter tolerance: 
         

     

    pdh 8 e1

    پرسش و پاسخ

    0 پرسش و پاسخ

    پرسش و پاسخی وجود ندارد

    محصولات مرتبط
    مشاهده همه