امکانات
تکرار کننده 3R (تقویت مجدد، شکل دهی مجدد و کلاک مجدد)
پشتیبانی از Jumbo Frame
حمل و نقل شفاف و تاخیر بسیار کم
از طول موج DWDM/CWDM تجویز شده توسط ITUT پشتیبانی کنید
پشتیبانی از عملکرد DMI برای ماژول فیبر SFP+/XFP
پشتیبانی از عملکرد تست Loopback
پشتیبانی از مدیریت وب
نمایشگر LED حالت کامل
نصب آسان
Specification
| Equipment function | 3R Repeater | |
| Transmission Speed | 10Gb/s(9.95Gb/s-11.35Gb/s) | |
| Protocols | IEEE802.3ae (10Gbase-SR/LR/ER/ZR/LRM) | |
| Access Type | 10G LAN/ 10G WAN | |
| Maximum Packet Forwarding Rate | 14,880,950/S | |
Network management information | SFP+ or XFP fiber module detection SFP+ or XFP fiber module DMI function(Temperature , Voltage , Optical power) Link status detector Enable/Disabled Loopback test function Rate select (10Gbase-Lan or Wan) | |
| Interface Type | Type A: SFP+ To/From SFP+ | |
| Type B: SFP+ To/From XFP | ||
| Type C: XFP To/From XFP | ||
| Transmission Distance | Up to SFP+ module(Max 40Km) | |
| Up to XFP module (Max 80Km) | ||
| power requirement | Standalone: AC 220V or DC48V | |
| Power consumption: ≤6W | ||
| Work Environment | Operating Temp: 0~ 50 °C | |
| Humidity: 5%~90% (non-condensing) | ||
| Dimension | Standalone :125mm (W)×85mm(D)×28mm(H) | |
محصولات مشابه
Facilities
3R repeater (reamplification, reshaping and reclocking)
Jumbo Frame support
Transparent shipping and very low delay
Support DWDM/CWDM wavelength prescribed by ITUT
Support DMI function for SFP+/XFP fiber module
Support Loopback test function
Web administration support
Full mode LED display
Easy installation
Specification
| Equipment function | 3R Repeater | |
| Transmission Speed | 10Gb/s(9.95Gb/s-11.35Gb/s) | |
| Protocols | IEEE802.3ae (10Gbase-SR/LR/ER/ZR/LRM) | |
| Access Type | 10G LAN/ 10G WAN | |
| Maximum Packet Forwarding Rate | 14,880,950/S | |
| Network management information | SFP+ or XFP fiber module detectionSFP+ or XFP fiber module DMI function(Temperature , Voltage , Optical power) Link status detector Enable/Disabled Loopback test function Rate select (10Gbase-Lan or Wan) | |
| Interface Type | Type A: SFP+ To/From SFP+ | |
| Type B: SFP+ To/From XFP | ||
| Type C: XFP To/From XFP | ||
| Transmission Distance | Up to SFP+ module(Max 40Km) | |
| Up to XFP module (Max 80Km) | ||
| power requirement | Standalone: AC 220V or DC48V | |
| Power consumption: ≤6W | ||
| Work Environment | Operating Temp: 0~ 50 °C | |
| Humidity: 5%~90% (non-condensing) | ||
| Dimension | Standalone :125mm (W)×85mm(D)×28mm(H) | |