Technical specifications

• 1000BASE-ZX Ethernet 40dB SFP Transceiver
• 200 km ZX SFP for SMF @ 1.25Gbps
• 1550nm DFB+APD Laser 200 km SFP
• -0°C – 70°C Temperature – Extended/Industrial Available
• 2-Wire Interface Digital Diagnostic Monitoring (SFF-8724)
• Hot-swappable for SFP LC ports
• arioonet  1 year standard warranty
• Use with Finisar, Avago, JDSU & networks not requiring OEM compatibility
• SFP MSA / IEEE Std 802.3
• RoHS compliant

Technical information:

Fiber optic module SFP-GLC-ZR-SMD200

The SFP-GLC-ZR-SMD200 fiber optic module is a module that sends and receives data through a fiber optic cable instead of a cable. The medium used to transmit signals from one end to another is a beam of light, often referred to as a laser beam. In contrast, an electric wire uses electric current as a medium to transmit signals.

Fiber optic communications have completely changed the landscape of the networking world. It has enabled high-speed networks and efficient and reliable data transmission. All fiber optic networks use optical transceivers, which are hot-swappable modules attached to communication equipment. A variety of optical receivers have been developed and are currently used in various networks around the world.

This article provides insight into the different types of fiber optic modules, the systems that can use the fiber optic module, and also explains how the CBO-IT fiber optic module can be used with communications equipment from several original equipment manufacturers (OEMs). gives

For what systems can the optical fiber module transmitter be used?

The SFP-GLC-ZR-SMD200 fiber optic module is used for a large number of networks and are usually protocol independent. Optical transmitters are physical layer devices and their purpose is only to send and receive data in the form of optical pulses. These light pulses are then converted into bits and presented to the communication equipment. The main applications of photoreceptors are:

• Ethernet
• Fibre Channel
• InfiniBand
• SDH/SONET

Ethernet is the most widely used network technology. Almost every data network uses Ethernet as its core technology. Another widely used technology is Fiber Channel, which is primarily used for storage networks. Fiber Channel uses custom optical transceivers to support the Fiber Channel protocol and speeds that differ from Ethernet standards.

For example, broadband Ethernet fiber optic module 1 gigabit per second, 10 Gbps, 40 Gbps, and 100 Gbps are available, while 4 Gbps Fiber Channel optical transmitters, 8 gigabit per second, 16 GB per second, 32 gigabits per second, etc. are produced in Erionet.

The InfiniBand fiber optic module is also used in certain networks that use the InfiniBand protocol. QSFP fiber optic modules support InfiniBand. Other less commonly used receivers are SDH/SONET optical transmitters used in active optical networks. These enable faster communication over fiber optic cables in a large-scale network that can be spread over a large physical and geographical area. SDH/SONET also enables multi-protocol transmission.

Is Eriont’s SFP-GLC-ZR-SMD200 fiber optic module compatible with other brands on the market?

Fiber optic modules are standards-based equipment with form factors, pin configurations, and other electrical and optical parameters exactly the same for each manufacturer. It is not necessary to use the equipment manufacturer’s optical module with the equipment, but any standard optical transmitter can be used.

Fiber optic module SFP-GLC-ZR-SMD200  Eriont They offer a wide range of choices and are fully standards-based, so it can be used with almost any standard-compliant equipment manufacturer. Leading vendors supported by Everiont optical modules include:

• Cisco
• Juniper
• HP
• DELL
• Huawei
• Brocade
• Lenovo
• Fortinet
• Barracuda
• Erickson
• Nokia

Made in Iran – compatible with various products in the market – 2 years warranty

Arivant brand