It can supply power to POE terminal equipment such as wireless AP, webcam, VoIP phone, visual access control building through network cable, to meet the network environment that requires high density power supply, suitable for hotels , universities, parks, supermarkets, sightseeing spots, factory districts and small and medium companies SMB form a cost-effective network.

AR-SWM8P-G2S has full L2+ network management, support for IPV4 management, full fixed route rate transmission, security protection mechanism, full ACL/QoS policy and rich VLAN functions, and it is easy to manage and maintain.

Support multiple network redundancy protocols STP/RSTP/MSTP (<50ms) to improve link backup and network reliability. When a one-way network fails, communications can be quickly restored to ensure uninterrupted communications for critical applications.

According to the actual needs of the application, you can configure several functional services such as PoE power management, port traffic control, VLAN division and SNMP through the web network management mode.

Advanced features
The AR-SWM8P-G2S management switch is equipped with a full set of L2 features, including IGMP Snooping, Port Mirroring, Spanning Tree Protocol (STP) and Link Aggregation Control Protocol (LACP). IEEE 802.3x flow control functionality allows servers to connect directly to the switch for fast and reliable data transfer. The switch also supports advanced features such as static routes that allow network administrators to divide the network into VLANs and increase network efficiency. Network maintenance features include loopback detection and cable failure detection. Loopback detection significantly speeds up troubleshooting by automatically detecting and shutting down switching loops. The cable detection feature, designed primarily for administrators, determines cable quality and quickly discovers faults, enabling easy troubleshooting and maintenance.

Automatic monitoring VLAN and automatic voice VLAN
The AR-SWM8P-G2S supports Auto Voice VLAN and Surveillance Mode, which allows voice and video traffic to be automatically detected and treated as normal network traffic. Auto Voice VLAN detects Voice over IP (VoIP) traffic and automatically segments it from the rest of the network, enhancing security and allowing Quality of Service (QoS) to be enforced. Surveillance Mode identifies ONVIF-compliant cameras and places them in a surveillance VLAN, enabling the use of a single switch for audio, video, and data, eliminating the need for dedicated hardware and cost. Reduces maintenance. Surveillance Mode also has its own web interface that makes monitoring features easily accessible and simplifies the management of your surveillance network.

Secure your network
Everiont’s innovative protection engine protects switches from traffic floods caused by virus attacks. The switch also supports 802.1X port-based authentication, allowing network clients to authenticate through external RADIUS servers. The Access Control List (ACL) feature enhances network security and helps protect the internal IT network. The AR-SWM8P-G2S also features Address Spoofing Prevention (ARP), which protects against attacks on the network that allow an intruder to intercept data frames, modify traffic, or spoof traffic by sending fake ARP messages. In general, stop. . To prevent ARP spoofing attacks,
The switch uses packet control ACLs to block invalid packets that contain spoofed ARP messages. For added security, the DHCP server screening feature filters DHCP responses on unauthorized ports to prevent them from being assigned IP addresses.

Full management
The AR-SWM8P-G2S switch comes with the Arioo Network Assistant (ANA) tool, which allows administrators to remotely control their network down to the port level. The Arioo Network Assistant tool also allows customers to easily find multiple Ariote Smart Managed Switches in the same L2 network segment and display them on the screen for instant access. By using this tool, users do not need to change the IP address of their PC. It allows to configure and initialize all discovered devices, including password changes and firmware upgrades, simultaneously. The switch also supports Command Line Interface (CLI) via Telnet.

General standards

• IEEE 802.3 10BASE-T Ethernet (twisted-pair copper)
• IEEE 802.3u 100BASE-TX Fast Ethernet (twisted-pair copper)
• IEEE 802.3ab 1000BASE-T Gigabit Ethernet (twisted-pair copper)
• IEEE 802.3z 1000Base-X
• IEEE 802.3az Energy Efficient Ethernet
• IEEE 802.3x Flow Control
• IEEE 802.3af
• IEEE 802.3at
• Auto-negotiation

Number of Ports 

• 8 10/100/1000Base-T PoE
• 2 1000Base-X SFP

Network Cables 

• UTP Cat. 5, Cat. 5e (100 m max.)

Full/Half Duplex 

• Full/half duplex for 10/100 Mbps speeds
• Full duplex for Gigabit speed

Media Interface Exchange 

• Auto or configurable MDI/MDIX

Performance 

Switching Capacity 

• 20 Gbps

Transmission Method 

• Store-and-forward

MAC Address Table 

• 8K entries

MAC Address Update 

• Up to 256 static MAC entries

Maximum 64 bytes packet forwarding rate 

• 14.88 Mpps

Packet Buffer Memory 

• 512 KB per device

PoE Capable Ports

• Up to 30 W on ports 1 to 8

PoE Power Budget

• 130 W

Physical & Environmental

Power Input

• 100 to 240 V AC 50/60 Hz, internal universal power supply

Maximum Power Consumption

• 152.3 W (PoE on)
• 9.4 W (PoE off)

Standby Power Consumption 

• 4.3 W/100 V, 5.2 W/240 V

Fan Quantity 

• 0

Acoustics 

• 0 dB(A)

Heat Dissipation 

• 519.41 BTU/hr

Operating Temperature 

• -5 to 50°C

Storage Temperature 

• -20 to 70°C

Operating Humidity 

• 0% to 95% non-condensing

Storage Humidity 

• 0% to 95% non-condensing

Dimensions 

• 330 x 180 x 44 mm

Weight 

• 1.77 kg

Diagnostic LEDs

• Power (per device)
• PoE Max (per device)
• Link/Activity/Speed (per port)
• Power Fail/Power Ok (per PoE port)

MTBF 

• 1,274,005 hours

Software Features

L2 Features

• MAC Address Table

  – 8K entries

• IGMP Snooping

  – IGMP v1/v2 Snooping

  – IGMP v3 awareness

  – Supports 256 IGMP groups

  – Supports at least 64 static multicast addresses

  – IGMP per VLAN

  – Supports IGMP Snooping Querier

• Loopback Detection
• 802.3ad Link Aggregation:

  – Maximum of 8 groups/8 ports per group

• LLDP
• LLDP-MED
• Jumbo Frame

  – Up to 10,000 bytes

• Spanning Tree Protocol

  – 802.1D STP

  – 802.1W RSTP

  – 802.1s MSTP

• Flow Control

  – 802.3x Flow Control

  – HOL Blocking Prevention

• Port Mirroring

  – One-to-One

  – Many-to-One

  – Supports Mirroring for Tx/Rx/Both

• Multicast Filtering

  – Forwards all unregistered groups

  – Filters all unregistered groups

• Configurable MDI/MDIX
• MLD snooping

  -MLD v1

  – MLD v2 awareness

  – 256 MLD groups

VLAN

• 802.1Q
• VLAN Group

  – Max. 256 static VLAN groups

  – Configurable VID from 1 – 4094

• Asymmetric VLAN
• Auto Voice VLAN

  – Max. 10 user-defined OUI

  – Max. 8 default YES

• Auto Surveillance VLAN

QoS (Quality of Service)

• 802.1p
• 8 queues per port
• Queue Handling

  – Strict

  – Weighted Round Robin (WRR)

• CoS based on

  – 802.1p priority queues

  – DSCP

  – MAC address

  – EtherType

  – IP address

  – Protocol type

  – ToS

  – IP precedence

  – IPv6 Traffic Class

  – TCP/UDP port

• Bandwidth Control

  – Port-based (Ingress/Egress, min. granularity 10/100/1000 is 16 Kb/s)

L3 Features

• IP interface

  – Supports 4 interfaces

• IPv6 Neighbor Discovery (ND)
• Static routing

  – 124 IPv4 static route entries

  – 50 IPv6 static route entries

Access Control List (ACL)

• Max. 50 access lists
• Max. 768 rules shared by IPv4, MAC, and IPv6
• Each rule can only be associated with a single port
• ACL based on

  – TCP/UDP port

  – 802.1p priority queue

  – VLAN

  – MAC address

  – IP address

  – EtherType

  – DSCP

  – Protocol type

  – IPv6 traffic class

Security

• Broadcast/Multicast/Unicast Storm Control
• Traffic segmentation
• SSH v2
• SSL
• TLS v1.0
• DoS attack prevention
• 802.1X Port-based Access Control
• Port Security

  – Supports up to 64 MAC addresses per port

• ARP Spoofing Prevention

  – Max. 127 entries

• DHCP Server Screening
• IP-MAC-Port Binding (Smart Binding)

  – ARP Inspection

  – IPv4 Inspection

  – IPv6 Inspection

  – DHCP Snooping

AAA

• 802.1X Authentication

  – Supports local/RADIUS database

  – Supports port-based access control

  – Supports EAP, OTP, TLS, TTLS, PEAP

• IPv6 RADIUS server
• Support MD5 authentication

OAM

• Cable Diagnostics
• Factory Reset

Management

• Web-based GUI
• Compact CLI
• Telnet Server
• TFTP Client
• Configurable MDI/MDIX
• SNMP v1/v2c/v3
• SNMP Trap
• Backup/upgrade firmware
• Smart Wizard
• Upload/download configuration file
• BootP/DHCP Client
• System Log

  – Max. 500 log entries

• SNTP
• ICMP v6
• IPv4/v6 Dual Stack
• DHCP Auto Configuration
• Time setting

  – SNTP

• RMONv1
• Trusted host
• Dual image
• Dual configuration
• CPU monitoring

MIB/RFC

• RFC783, 1350 TFTP
• RFC791 IP
• RFC768 UDP
• RFC793 TCP
• RFC792 ICMPv4
• RFC2463, 4443 ICMPv6
• RFC826 ARP
• RFC951, 1542, 2131 BootP/DHCP Client
• RFC1212 Concise MIB Definitions
• RFC1213 MIB II
• RFC1215 MIB Traps Convention
• RFC1350 TFTP
• RFC1493 Bridge MIB
• RFC1769 SNTP
• RRFC1157, 2570, 2573, 2575, 2576 SNMP MIB
• RFC1442, 1901, 1902, 1903, 1904, 1905, 1906, 1907, 1908, 2578, 3418 SNMPv2 MIB
• RFC271, 1757, 2819 RMON MIB
• RFC2021 RMONv2 MIB
• RFC1398, 1643, 1650, 2358, 2665 Ether-like MIB
• RFC1321, 2284, 2865, 2716, 3580 Extensible Authentication Protocol (EAP)
• RFC2674 802.1p MIB
• RFC2461, 4861 Neighbor Discovery for IPv6
• RFC2462, RFC4862 IPv6 Stateless Address Auto-configuration (SLAAC)
• RFC2464 IPv6 over Ethernet and definition
• RFC4291 IPv6 Addressing Architecture
• RFC2893, 4213 IPv4/IPv6 dual stack function
• RFC2233 Interface Group MIB
• RFC2138, 2139, 2618, 2865 RADIUS Authentication Client MIB
• RFC2246 SSL
• RFC2475, 2598 CoS
• RFC3164, 3195 System Log
• RFC3411, 3412, 3413, 3414, 3415, 3416, 3417 SNMPv3
• RFC4022 MIB for TCP
• RFC4113 MIB for UDP
• RFC2389 MIB for Diffserv.
• RFC2620 RADIUS Accounting Client MIB
• Private MIB
• PoE MIB
• DDP MIB
• LLDP-MED MIB