This device can supply POE terminal equipment such as wireless AP, webcam, VoIP phone, etc. through a network cable to supply the network environment that needs high-power PoE power supply. In addition to being used as network infrastructure in data centers and companies, it is suitable for campuses, factory dormitories, and medium and large companies.

The AR-SW24P-410G network switch has full L3 network management function, supports IPV4/IPV6 management, full routing, full security protection, ACL/QoS policy and VLAN functions, and is easy to manage and maintain.

It supports multiple STP/RSTP/MSTP (<50ms) network transmission protection protocols and (ITU-T G.8032) ERPS to improve link backup and network reliability.

When a one-way network goes down, communication can be quickly established through the other link to provide uninterrupted critical communications. According to the actual requirements of the network structure, you can configure multiple application services such as PoE power management, port traffic control, VLAN division and SNMP through the web.

Capabilities

Gigabit ports, 10G uplink

All sections support “Gigabit Ethernet port and 10G SFP+ uplink port”, which enables users to build network flexibility to meet the needs of different scenarios.

◇ full support full-duplex based on IEEE802.3x and half-duplex based

Smart PoE power supply

24*10/100/1000Base-T RJ45 ports can support POE power supply to meet the needs.

Security monitoring, remote conferencing system, wireless coverage and other scenarios.

◇ IEEE 802.3af/in PoE standard, without harming non-PoE devices.

The prioritization system for the PoE port provides the port with the highest priority level the first time during power-up.

Set the port with PoE network management, PoE port power allocation, priority setting.

View power status, activation schedule

security

◇ 802.1X authentication

◇ Port isolation,Storm control.

◇ IP-MAC-VLAN-Port connection.

The ability to process large amounts of data

◇ IEEE802.1Q VLAN, flexible VLAN section, voice VLAN and QinQ configuration.

o QoS, priority mode based on 802.1P, Port & DSCP, queue scheduling algorithm including EQU, SP, WRR and SP+WRR.

◇ ALC, data packaging through the configuration of matching rules, processing operations and

Allowing time, and flexible and secure access control

◇ IGMP V1/V2 و IGMP Snooping.

◇ ERPS/STP/RSTP/MSTP.

◇ Static and dynamic aggregation.

Stable and reliable

Low power consumption, no fan, galvanized steel box.

Stable PoE output

◇ CCC ، CE ، FCC ، RoHS.

User-friendly panel, can show device status through PWR, SYS, Link, L/A, PoE LED indicator.

Easy performance management and maintenance

◇ Web management, command line CLI (console, Telnet), SNMP (V1/V2/V3).

HTTPS ، SSLV3 و SSHV1/V2.

◇ RMON, system log, LLDP and port traffic statistics.

CPU monitoring, memory monitoring, ping test and cable detection.

 Technical specifications of AR-SW24P-410G network switch 

Model AR-sw24p410G

Interface Characteristics

Fixed Port 24*10/100/1000Base-T PoE ports (Data/Power)

4*1/10G uplink SFP+ fiber slot ports (Data)

1*Console RS232 port (115200,N,8,1)

Ethernet Port Port 1-24 can support 10/100/1000BaseT auto-sensing,Full/half duplex

MDI/MDI-X self-adaption

Twisted Pair

Transmission

10BASE-T: Cat3,4,5 UTP(≤100 meter)

100BASE-TX: Cat5 or later UTP(≤100 meter)

1000BASE-T: Cat5e or later UTP(≤100 meter)

Optical Fiber Port 10G SFP+ optical fiber port, default matching optical modules (optional order single-mode / multi-mode, single fiber / dual fiber optical module.

LC)

Optical Cable/

Distance

Multi-mode:850nm 0~300M(10G) ,850nm 0~500M (1.25G); Single-mode:1310nm 0~40KM,1550nm 0~120KM.

Chip Parameter

Network

Management Type

L3

Network Protocol IEEE802.3 10BASE-T, IEEE802.3i 10Base-T

IEEE802.3u 100Base-TX, IEEE802.3ab 1000Base-T

IEEE802.3z 1000Base-X, IEEE802.3ae 10GBase-LR/SR, IEEE802.3x

Forwarding Mode Store and Forward(Full Wire Speed)

Switching Capacity 598Gbps (non-blocking)

Forwarding

Rate@64byte

95.23Mpps

MAC 32K

Buffer Memory 32M

Jumbo Frame 9.6K

LED Indicator Power: PWR (yellow), system:SYS (yellow); network:Link (yellow);

PoE: PoE (green); Fiber port : L/A (green)

Reset Switch Yes, support one key to restore factory settings

PoE & Power Supply

PoE Port Port 1 to 24

PoE Management PoE working status

Delay start of power supply

PoE output priority configuration

Scheduling of PoE operation and time

Total power limit of PoE power supply

PoE output power allocation, off& af &at

Power Supply Pin Default: 1/2 (+), 3/6 (-)

Max Power Per Port 30W, IEEE802.3af/at

Total PWR / Input

Voltage

400W/ (AC100-240V) 600W/ (AC100-240V)

Power Consumption Standby<25W, Full Load<400W Standby<30W, Full Load<600W

Power Supply Built-in power supply,

AC100~240V 50-60Hz 5A

Built-in power supply, AC100~240V

50-60Hz 6.6A

Physical Parameter

Operation TEMP /

Humidity

-20~+55°C;5%~90% RH Non condensing

Storage TEMP /

Humidity

-40~+80°C;5%~95% RH Non condensing

Dimension (L*W*H) 440*290*44.5mm

Net /Gross Weight <4.4kg / <5.0kg <4.6kg / <5.3kg

Installation Desktop type ,19 inch 1U cabinet installation

Certification & Warranty

Lightning protection / protection level Lightning protection: 4KV 8/20us; Protection level: IP30

Certification CCC;CE mark, commercial; CE/LVD EN60950;FCC Part 15 Class B;

RoHS

Warranty 3 years, lifelong maintenance.

Network Management Features

Interface IEEE802.3X (Full-duplex)

Port temperature protection setting

Port green Ethernet Energy-saving setting

Broadcast storm control based on port speed

The speed limit of the message flow in the access port.

The minimum particle size is 64Kbps.

Layer 3 Features L3 network management ,IPV4/IPV6 management

L3 soft routing forwarding,

Static route, Default route @ 128 pcs, APR @ 1024 pcs

VLAN 4K VLAN based on port, IEEE802.1q

VLAN based on the protocol

VLAN based on MAC

Voice VLAN, QinQ configuration

Port configuration of Access, Trunk, Hybrid

Port Aggregation LACP, Static aggregation

Max 14 aggregation groups and 8 ports per group.

Spanning Tree STP (IEEE802.1d), RSTP (IEEE802.1w), MSTP (IEEE802.1s)

Industrial Ring

Network Protocol

G.8032 (ERPS),Recovery time less than 20ms 250 Ring at most, Max 1024 devices per ring.

Multicast MLD Snooping v1/v2,Multicast VLAN

IGMP Snooping v1/v2, Max 1024 multicast groups, Fast log out

Port Mirroring Bidirectional data mirroring based on port

QoS Flow-based Rate Limiting

Flow-based Packet Filtering

8*Output queues of each port

802.1p/DSCP priority mapping

Diff-Serv QoS,Priority Mark/Remark

Queue Scheduling Algorithm (SP, WRR, SP+WRR)

ACL Port-based Issuing ACL,ACL based on port and VLAN

L2 to L4 packet filtering, matching first 80 bytes message. Provide ACL based on MAC, Destination MAC address, IP Source, Destination IP, IP Protocol Type, TCP/UDP Port, TCP/UDP Port Range, and VLAN, etc.

Security IP-MAC-VLAN-Port binding

ARP inspection,Anti-DoS attack

AAA & RADIUS,MAC learning limit

Mac black holes,IP source protection

IEEE802.1X & MAC address authentication

Broadcast storm control,Backup for host datum

SSH 2.0,SSL,Port isolation,ARP message speed limit

User hierarchical management and password protection

DHCP DHCP Client,DHCP Snooping, DHCP Server,DHCP Relay

Management One-key recovery

Cable Diagnose,LLDP

Web Management (HTTPS)

NTP,System work log,Ping Test

CPU instant utilization status view

Console/AUX Modem/Telnet/SSH2.0 CLI

Download & Management on FTP, TFTP, Xmodem, SFTP,SNMP

V1/V2C/V3

arioonet NMS – smart network management system platform(LLDP+SNMP)

System Category 5 Ethernet network cable

Web browser: Mozilla Firefox 2.5 or higher, Google browser chrome V42

or higher, Microsoft Internet Explorer10 or later;

TCP/IP, network adapter, and network operating system (such as Microsoft Windows, Linux, or Mac OS X) installed on each computer in a network