120 km optical fiber module
1.25G SFP 1550nm 120Km compatible GLC-ZR-SMD-120 transceiver modules
| Product name: | Optical Transceiver | Type: | SFP |
| Bandwidth: | 1.25Gb/s | Wavelength: | 1550nm |
| Distance: | 120KM | Connector: | Duplex LC |
| Operating temperature: | 0~70 C | Warranty: | 2 years |
GLC-ZR-SMD fiber optic module
The GLC-ZR-SMD-120 fiber optic module is a module that sends and receives data through a fiber optic cable instead of a cable. The medium used to transmit signals from one end to another is a beam of light, often referred to as a laser beam. In contrast, an electric wire uses electric current as a medium to transmit signals.
Fiber optic communications have completely changed the landscape of the networking world. It has enabled high-speed networks and efficient and reliable data transmission. All fiber optic networks use optical transceivers, which are hot-swappable modules attached to communication equipment. A variety of optical receivers have been developed and are currently used in various networks around the world.
For what systems can the optical fiber module transmitter be used?
The GLC-ZX-SMD-120 fiber optic module is used for a large number of networks and are usually protocol independent. Optical transmitters are physical layer devices and their purpose is only to send and receive data in the form of optical pulses. These light pulses are then converted into bits and presented to the communication equipment. The main applications of photoreceptors are:
- Ethernet
- Fibre Channel
- InfiniBand
- SDH/SONET
Ethernet is the most widely used network technology. Almost every data network uses Ethernet as its core technology. Another widely used technology is Fiber Channel, which is primarily used for storage networks. Fiber Channel uses custom optical transceivers to support the Fiber Channel protocol and speeds that differ from Ethernet standards.
For example, broadband Ethernet fiber optic module 1 gigabit per second, 10 Gbps, 40 Gbps and 100 Gbps are available while fiber channel optical transceivers are available at 4 Gbps, 8 Gbps, 16 Gbps, 32 Gbps and etc. are produced in Eriont.
The InfiniBand fiber optic module is also used in certain networks that use the InfiniBand protocol. QSFP fiber optic modules support InfiniBand. Other less commonly used receivers are SDH/SONET optical transmitters used in active optical networks. These enable faster communication over fiber optic cables in a large-scale network that can be spread over a large physical and geographical area. SDH/SONET also enables multi-protocol transmission.
Is the GLC-ZR-SMD-120 fiber optic module compatible with other brands on the market?
Fiber optic modules are standards-based equipment with form factors, pin configurations, and other electrical and optical parameters exactly the same for each manufacturer. It is not necessary to use the equipment manufacturer’s optical module with the equipment, but any standard optical transmitter can be used.
GLC-ZR-SMD fiber optic module Eriont They offer a wide range of choices and are fully standards-based, so it can be used with almost any standard-compliant equipment manufacturer. Leading vendors supported by Everiont optical modules include:
Made in Iran – compatible with various products in the market – 2 years warranty
Arivant brand
Support switches
Cisco WS-C2960X-24TD-L
Cisco WS-C3850-12S
Cisco ASR A901-6CZ-F-A
Cisco ASR 9000 A9K-24X10GE-TR
Cisco WS-C3560E-12D
Cisco WS-C3650-24TD
Cisco 4900 ME-4924-10GE
Cisco 6800 C6824-X-LE-40G
Cisco WS-C3560E-48PDF
Cisco 6000 NC6-60X10GE-L-S
Cisco Nexus 7000 N7K-F248XP-25E
Cisco WS-C4500X-16SFP+
Cisco ASR 9000 ASR-9922-RP-SE
Cisco ASR-9000V-DC-A
Cisco Nexus 7000 N7K-M132XP-12L
Cisco WS-C2960XR-24PD-I
Cisco WS-C3850-12XS
Cisco Nexus 3000 N3K-C3064PQ-10GE
Cisco Nexus 5000 N55-M8P8FP
Cisco ASR 9000 A9K-MPA-8X10GE
